JVC SR-L911UB VCR User Manual


 
31
AL
TIME MODE
7 RECORDING
7-4 Alarm Recording
Alarm recording functions during timelapse recording. When an alarm signal is input to the rear panel's ALARM IN terminal,
an index code is recorded on the tape and the VCR automatically switches to the 8H (EP) mode for realtime recording of the
alarm situation. Normal timelapse recording is restored after the preset alarm recording duration has passed.
* Alarm recording will not start from the Pause mode.
“AL” indication
Set the alarm recording duration, buzzer ON/OFF during
alarm recording and the operation mode at the tape end
during alarm recording with the function menu switches.
(Menu switches for alarm/sensor recording mode setting)
5 During alarm recording, the AL indication is lit on the
display. After alarm recording is complete, the AL
indication blinks on the display to show that an alarm
signal has been input.
* An index code (VISS) is recorded at the start point of the alarm recording as an alarm cue signal.
* During alarm recording, a +12 V signal is output from the rear panel’s ALARM REC OUT terminal.
Extinguished
Display "AL"
indication
Lit
Lit
Blinking
Blinking
Record mode
Timelapse
mode
Timelapse
mode
Timelapse
mode
8H (EP)
mode
8H (EP)
mode
Timelapse
recording
Timelapse
recording
Timelapse
recording
Alarm
recording
Alarm
recording
Alarm signal input
Alarm signal input