JVC SR-L911UB VCR User Manual


 
40
VTR MODE 1
(SHARPNESS) NORMAL
(AUTO REC) OFF
(REC CHECK) MANUAL
(TAPE END MODE) STOP
(INDEX SEARCH) ON
(CAMERA SW) OFF
(TAPE END BUZZER) OFF
(WARNING BUZZER) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
8-4 Index Search
Searching the index code (VISS signal) recorded at the
start of alarm recording helps you quickly locate alarm
recordings (index search function).
To use the index search function, set the function menu
switch [INDEX SEARCH] to ON.
5 When reverse shuttle search or fast-forward shuttle
search is executed, the Index Search mode is engaged.
When an index code is located, playback starts
automatically.
To engage the Reverse Shuttle Search mode or the
Fast-Forward Shuttle Search mode, press the
[REW] or [FF] button once during playback.
5 When an index code is searched in the Fast-Forward
mode or the Rewind mode, the Stop mode is
automatically engaged when the code is located.
• The VISS indicator is shown on the display whenever
the Index Search mode is engaged.
Index Search does not function in the Auto Rewind
mode.
When the picture moves up and down in the
Still mode
Press the [V. LOCK +/-] button to minimize vertical jitter.
When noise appears in the picture in the Play/
Field Advance Play/Search mode
Tracking can only be adjusted in the following modes:
VHS Standard Play,8H (EP) Play,L24H Play and L40H
Play.
Field Advance Playback with the [PAUSE/STILL]
button
Search mode
Press the [TRACKING +/-] button to reduce noise.
To restore the tracking preset mode, press the + and -
buttons simultaneously.
8-5 Tracking/V. Lock Adjustment
[TRACKING +/-] button
[V. LOCK +/-] button
8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
VTR mode 1 setting screen
INDEX
SEARCH
Set to
ON