Filter
Top Products
34
VTR MODE 1
(SHARPNESS) NORMAL
(AUTO REC) OFF
(REC CHECK) AUTO
(TAPE END MODE) REPEAT
(INDEX SEARCH) OFF
(CAMERA SW) OFF
(TAPE END BUZZER) OFF
(WARNING BUZZER) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
7-6 Repeat Recording
When the tape reaches the end during recording, it is automatically rewound and recording starts again from the beginning.
5 To execute repeat recording, set <TAPE END MODE>
on the VTR mode 1 setting screen to REPEAT.
5
Setting the function menu switch <TAPE END MODE>
on the alarm/sensor recording mode setting screen
• When the tape ends during recording in the case when
alarm or sensor recording is executed even once, the
tape stops or rewinds and stops at the beginning if this
menu switch set to “STOP” or “REW”,.
If this menu switch is set to "EJECT", the tape is
ejected.
To continue repeat recording even when alarm/
sensor recording is executed, set this menu
switch to “REPEAT” .
* When repeat recording is performed, the previously-
recorded alarm recording is erased.
Auto Recording Check function
This function automatically checks recording quality at
the beginning of the tape during repeat recording.
• To activate the Auto Recording Check function, set the
<REC CHECK> function menu switch in the VTR mode 1
setting screen to AUTO.
Operation of the Auto Recording Check function
• The recorded section at the beginning of the tape is
automatically played back in the Repeat Record mode
and the FM level recorded on the tape is checked. If
the level is satisfactory, recording continues.
• If recording quality is deemed inferior, the heads are
cleaned automatically. After several seconds, recording
is checked again.
If recording quality is still unsatisfactory after two
consecutive checks, the error indicator E-09 is shown
in the display and recording continues.
Function menu switch <REC CHECK> set to AUTO
Normal
Defective
Recording
Recording
Recording
Repeat recording
7 RECORDING
Defective
Beginning of
the tape
Auto head
cleaning
Auto recording
for several
seconds
Recording
check
Recording
check
Auto head
cleaning
Error indicator E-09 display
Display
Normal
Auto recording
check function
Tape end mode
Set to
REPEAT
VTR mode 1 setting screen