JVC HR-A230EK VCR User Manual


 
17
TIMER RECORDING
Information
On Video
Plus+
With Video Plus+, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognize.
NOTE:
“Guide Channel” refers to the assigned TV station numbers,
according to broadcast area, for Video Plus+ timer recording.
IMPORTANT
Perform the following procedure after the channel setting steps
on pages 7 and 26 – 29, and after the Clock Set procedure on
page 8.
After setting the Guide Channel, the station names and preset
positions may be incorrect if you stored or skipped channels. In
this case, re-perform Guide Channel setting.
q
6
12
45
3
6
8
0
7
9
1
3
2
OK
NUMBER
CH SET
CANCEL
Guide Channel
Preset Position
TV PROG.
MAKE LIST OF STORED
PRESET POSITIONS AND
STATION NAMES
1
(Ex.)
ACCESS CH. SET DISPLAY
2
Press and hold CH SET for over 2 seconds. "AUTO"
appears on the front display panel.
ACCESS GUIDE CHANNEL
SET DISPLAY
3
Press PUSH JOG%
to select "GUID", then press OK.
The Guide Channel Set display appears.
Guide Channel Set
Preset position Station name
1 BBC 1
2 BBC 2
3 ITV
4 CH 4
PUSH JOG
CONTINUED ON NEXT PAGE.
NUMBER "0"