Filter
Top Products
22
TIMER RECORDING(cont.)
q
6
12
45
3
6
8
0
7
9
1
3
2
OK
WEEKLY
TIMER
DAILY
TV PROG.
SP/LP
7
ENTER PRESET POSITION
6
Press TV PROG. +/–.
SET TAPE SPEED
7
Press SP/LP ( ) to set the tape speed.
RETURN TO NORMAL
DISPLAY
8
After confirming all information is correct, press OK
and the normal display appears.
● Repeat steps 1–8 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
9
Press TIMER.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday – Friday). "W" or "D" appears on the front
display panel.
M
D
SP
Day
≠
Month
≠
Preset position
≠
TIMER
SP/LP
9
7
8
6
NOTES:
●
For safety, your recorder disables all other functions while in
the Timer mode. If you want to use the recorder but its Timer
mode is engaged, press TIMER and all other functions are
operable. To re-engage the timer, press TIMER.
●
You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, "FULL" appears on the front display panel. To record
the extra programme, you must first cancel any unnecessary
programmes (
੬
pg. 23).
●
To timer-record a satellite broadcast through a satellite receiver
connected to the AV2 IN connector on the back of the
recorder, in step 6 above, select "AU2" for the preset position
by pressing TV PROG. +/–. Before the selected programme
begins, select the appropriate channel on the satellite receiver,
then set the receiver's timer. If your satellite receiver doesn't
have a timer, leave the unit's power switched on.