JVC HR-A230EK VCR User Manual


 
28
USING THE CONFIRMATION DISPLAY (cont.)
12
45
3
6
8
0
7
9
1
3
2
q
6
OK
Perform steps 1 and 2 on page 26 to access the Confirmation
display before continuing.
Set Stations (A)
SELECT ITEM
1
Press PUSH JOG
%fi
until the item you want is
displayed. Then press OK twice and the station’s name
(or "– –") begins blinking.
SELECT NEW STATION
2
Press PUSH JOG%fi until the new station’s name you
want to store begins blinking.
Registered station names ( pg. 30) appear as you
press PUSH JOG%
.
SWITCH STATIONS
3
Press OK.
Repeat steps 1 through 3 as necessary.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
NOTE:
First perform step 1 of the above procedure.
SELECT STATION NAME
CHARACTER
2
Press PUSH JOG
and the first letter of the station
name (or "
") begins blinking.
ENTER NEW CHARACTER
3
Press PUSH JOG%
to cycle through the characters
(A–Z, 0–9, –,
*
, +, (space)) and stop when the
desired one is indicated, then press PUSH JOG to
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.
Repeat steps 1 through 3 as necessary.
If you make a mistake, press PUSH JOG until the
incorrect character begins blinking. Then enter the
correct character by pressing PUSH JOG
%
.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
Set Stations (B)
CH SET
%
]
%
%
PUSH JOG
%