JVC HR-VP636U VCR User Manual


 
43
Edit To Or
From Another
VCR
You can use your VCR as the player or the recorder.
MAKE CONNECTIONS
1
Connect an AV cable (not supplied) between the
player’s VIDEO OUT and AUDIO OUT connectors and
the recorder’s VIDEO IN and AUDIO IN connectors.
When using your VCR as the recorder and a monaural
VCR as the player, connect the player’s AUDIO OUT
connector to the AUDIO IN L connector on the recorder.
LOAD CASSETTES
2
Insert the playback cassette into the player and the
cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to AUX. With this VCR, press NUMBER key “0” (AU
appears on the front display panel in place of a channel
number).
NOTE:
When using this VCR as the recorder, make sure to select
"FRONT" or "REAR" (depending on which input connectors
you use) at the Aux Input Screen. (To select the correct AUX
input connector, follow steps 4, 5, 911 from the "Edit
From A Camcorder" section,
pg. 44.)
START PLAYER
4
Set to its play mode.
START RECORDER
5
Set to its record mode.
Player
Your VCR
AUDIO OUT
VIDEO OUT
VIDEO IN
AUDIO IN
Another VCR
Recorder
EDITING
12
45
3
6
8
0
7
9
NUMBER "0"