Filter
Top Products
22
Getting started
XV-K505GD/XV-K503TN
LET0143-001A
[3U, 4U, US, UB, UT]
(EN)
Using the remote control unit
You can operate the unit with the remote control unit, and you can also operate
your TV or other components with the remote control unit.
To use the remote control unit for TV operation
You can operate a JVC TV with the remote control unit. To operate another
manufacture’s TV, you have to change the remote control signal. Also refer to the
manual supplied with your TV.
Changing the remote control signal
1 Set
KARAOKE
TV
DVD
on the remote control unit to TV.
2 Press and hold
TV
/ I
, then press
SET
.
Do not release
TV
/ I
. Keep holding
TV
/ I
until the next step is completed.
3 Holding
TV
/ I
, enter the manufacturer’s code (two digits) using
0
to
9
.
See the lists on the left to find the manufacturer’s code.
4 Release
TV
/ I
.
The following buttons can be used for operating the TV:
5 Try to operate your TV by pressing
TV
/ I
.
If your TV turns on or off, you have entered the correct code.
NOTE
¶
If there is more than one code listed for your brand of TV, try each one until
the correct one is entered.
No. Manufacturer
01 JVC
02 PANASONIC
03 SONY
04 SHARP
05 TOSHIBA
06 MITSUBISHI
07 HITACHI
08 SANYO
09 FUNAI
10 AIWA
11 DAEWOO
12 SAMSUNG
13 LG (GOLDSTAR)
14 THOMSON
15 FERGUSON
16 PHILIPS
17 GRUNDIG
18 ITT
19 MIVER
20 FINLUX
21 NOKIA
22 NEC
23 JINXING/PEONY1
24 PEONY2
25 PEONY3
26 KONKA
27 PEWIN/NOBLEX
28 TCL
Manufacturer code list
TV
/ I
CH
+
–
TV
VOLUME
+
–
0
to
9
CANCEL
TV/VIDEO
Turns the TV on or off.
Change the TV channels.
(with
KARAOKE
TV
DVD
set to TV only)
Adjusts the TV volume.
Selects the TV channels.
(with
KARAOKE
TV
DVD
set to TV only)
You can switch input mode (either TV or VIDEO).
(with
KARAOKE
TV
DVD
set to TV only)