Filter
Top Products
Additional information
61
Additional
information
English
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to
perform power switching.
1
Turn on the main power of the television.
2
Insert a disc (or tape) into the source component.
3
Press 3 of the source component.
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component which has started playback.
Notes for connection
• If you connect the unit to a receiver via AV COMPU LINK in a system including a Dolby Digital decoder, some functions may not
be performed automatically.
• Connect the AUDIO OUT jacks of the unit to the audio input jacks of a receiver that indicating “DVD.” Otherwise, the system
will not work correctly.
• There may be no description about connections to the unit in the instruction manual of a television or VCR. However a
television or VCR with AV COMPU LINK terminals indicating “II,” “EX” or “III” can be connected to the unit.
Operation
P.60-65-eng.fm Page 61 Friday, July 19, 2002 8:55 PM