Filter
Top Products
Getting started
XV-M557GD/XV-M556TN (EN)
LVT0391-016A [UX, 3U, 4U, US, UT, UB]
16
Getting
started
To use the remote control unit for TV operation
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
1 Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9).
Do not release TV/VIDEO. Keep holding it until the next step is completed.
2 Press 7 while holding down TV/VIDEO.
The following buttons can be used for operating the TV:
Turns the TV on or off.
Changes the TV channels.
Adjusts the TV volume.
Selects the TV channels
*For some TVs, pressing "+10" while holding down SHIFT
functions as the "RETURN" button, and pressing "10" while
holding down SHIFT functions as the "– / – –" button.
Switches input mode (either TV or VIDEO).
• The remote control unit is initially set for operating a JVC TV.
• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
TV ch
+
–
TV VOL.
+
–
TV/VIDEO
NOTES
SHIFT
+
DVD
TV
SHIFT
+
90
to
Manufacturer code list
Example:
To enter the manufacturer code "01":
Press "0" then "1."
No. Manufacturer
01 JVC
02 PANASONIC
03 SONY
04 SHARP
05 TOSHIBA/BEIJING/CHANGHONG
06 MITSUBISHI/CHANGHONG
07 HITACHI
08 SANYO
09 FUNAI
10 AIWA
11 DAEWOO
12 SAMSUNG
13 LG (GOLDSTAR)
14 THOMSON
15 FERGUSON
16 PHILIPS/TCL/CHANGHONG
17 GRUNDIG
No. Manufacturer
18 ITT
19 MIVER
20 FINLUX
21 NOKIA
22 NEC
23 JINXING/PEONY
24 PEONY
25 PEONY/CHANGHONG
26 KONKA
27 PEIJIN/NOBLEX
28 TCL
3 Try to operate your TV by pressing DVD - TV while holding SHIFT.
If your TV turns on or off, you have successfully set the control signal.
EN12-16XV-M557GD/556TN[U] 99.11.2, 1:46 PM16