Filter
Top Products
8
B
a
s
i
c
o
p
e
r
a
t
i
o
n
s
XV-N50BK/N55SL/LET0230-001A/English
Basic operations
NOTE
Turning on/off the player
Press DVD STANDBY/ON on the remote
control unit or press on the front panel.
The STANDBY/ON indicator on the front panel, which lights
in red during standby, lights in green.
The left and right sides of the display window are illuminated.
The opening display appears on the TV screen, and the following
messages may appear at the bottom of the opening display.
• NOW READING (The player is reading the disc information.)
• REGION CODE ERROR! (The region code of the DVD VIDEO
disc does not match the player. The disc cannot be played
back.)
• CANNOT READ THIS DISC
• OPEN
• CLOSE
• NO DISC
NOTES
• Even if you turn off the player, the player is not disconnected
from the AC power source as long as it is connected to the wall
outlet. This state is called standby mode. In this state, the player
consumes a very small amount of power.
• You can change the picture of the opening display. (See page
25.)
Initial setup
You can set the display language, TV monitor type and digital
output before using the player, by following the procedure below.
1 Press CHOICE for a few seconds to bring up
the first page of the DVD PLAYER SET UP
display.
The pull-down menu of the [ON SCREEN LANGUAGE] is
already open.
2 Press 5/∞ to select the desired language.
You can select the on-screen language for the preference
displays, etc. from among ENGLISH, FRENCH, and
SPANISH.
3 Press ENTER.
The second page is shown, in which the pull-down menu of
the [MONITOR TYPE] is already open.
4 Press 5/∞ to select the desired monitor type.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].
For a wide-screen TV, select [16:9]. (See page 27.)
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3 and numeric buttons
for controlling the player.
About invalid operation icon
When you press a button, and if the player does not accept its
operation, appears on your TV screen. Operations are
occasionally unacceptable even if is not displayed.
Note that some operations may not be accepted. For example,
some discs may not allow rapid advance/reverse or slow-
motion playback.
730
STANDBY indicator
TV DVD
NOW READING
Message area
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
DVD PLAYER SET UP
ENGLISH
FRENCH
SPANISH
ON SCREEN LANGUAGE options
SELECT
ENTER
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
MONITOR TYPE
4:3 L.B.
PICTURE SOURCE
AUTO
SCREEN SAVER
ON
BACKGROUND
MP3
DVD PLAYER SET UP
16:9
4:3 LB
4:3 PS
TO EXIT, PRESS CHOICE
MONITOR TYPE options
XV-NP1[J_UJ].book Page 8 Wednesday, July 9, 2003 8:15 PM