JVC XV-S60 DVD Player User Manual


 
Initial settings
46
Initial settings
PROGRESSIVE MODE
You can select the
progressive mode from the
following options.
•AUTO
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.
VIDEO 1
Suitable for playing back a video source disc with
static (inactive) pictures.
VIDEO 2
Suitable for playing back a video source disc with
dynamic (active) pictures.
•FILM
Suitable for playing back a film or progressive source
disc.
•SMART
Used to playback a disc containing both video and
film source materials. The unit recognizes the picture
type according to the current data.
* Normally, set the PROGRESSIVE MODE to “AUTO”.
* Some DVD discs may not be played back correctly
with the “AUTO” mode. If the playback picture is
unclear or noisy with a particular DVD Video disc, try
to change the mode.
The
PREFERENCE 2
display handles preferences
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
STREAM/PCM
Should be selected when you connect to the digital
input of an amplifier to a built-in DTS, Dolby Digital, or
MPEG multichannel decoder.
•DOLBY DIGITAL/PCM
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
* With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
NOTE
When playing back a film-source DVD Video disc with
the “PROGRESSIVE MODE” set to “FILM”, “SMART” or
“AUTO” and the progressive scan made is active,the
PROGRESSIVE indicator on the front panel lights. (See
page 15.)
Audio and system preference
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
SELECT KEY
PROGRESSIVE MODE
AUTO
4:3 LB
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
SELECT KEY
MODE 1
AV COMPULINK MODE
DVD 1
Playback discs
Output
STREAM/
PCM
DOLBY
DIGITAL/
PCM
PCM ONLY
DVD with 48 kHz,
16 bit linear PCM
48 kHz,16 bit,
stereo linear
PCM
++
DVD with 48 kHz,
20/24 bit linear
PCM
48/44.1 kHz,
16 bit, stereo
linear PCM*
++
DVD with 96 kHz,
linear PCM
48 kHz, 16 bit,
stereo linear
PCM*
++
DVD with DTS DTS bitstream 48 kHz, 16 bit,
stereo linear
PCM*
+
DVD with Dolby
Digital
Dolby Digital
bitstream +
48 kHz, 16 bit,
stereo linear
PCM*
DVD with MPEG
multichannel
MPEG
bitstream
48 kHz, 16 bit,
stereo linear
PCM
+
Video CD 44.1 kHz,
16 bit, stereo
linear PCM
++
Audio CD 44.1 kHz,16
bit,
stereo linear
PCM
++
Audio CD with DTS
DTS bitstream 44.1 kHz,
16 bit, stereo
linear PCM
+
CD -R/RW with
MP3
No output
++
NOTES
The unit does not provide the DTS decoding function.
When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers.
3HQJIP3DJH:HGQHVGD\0D\  $0