Filter
Top Products
HOME DVD PLAYER V10M10_IM_EN_12212007
www.jWIN.com
22
PREV
|WW
NEXT
XX|
MENU
A – B
SLOW
TITLE
REPEAT
OPERATIONAL INSTRUCTIONS
[|WW] PREV Button
While playing back a DVD, CD or VCD, press the [|WW] button to skip to
the previous chapter or track.
[XX|] NEXT Button
While playing back a DVD, CD or VCD, press the [XX|] button to skip to
the next chapter or track.
[MENU] Button
During DVD playback, press the [MENU] button to display the disc menu
of the current title.
During VCD/SVCD playback, press the [MENU] button to control PBC
ON/OFF.
Note: This function is subject to the disc.
[A–B] Button
During playback, press the [A-B] button to select point A, press it again to
select point B. the player will repeat the section from A to B automatically.
Press the [A-B] button a third time to cancel A-B repeat and clear points A
and B.
Notes: During CD/VCD/SVCD playback, points A and B must be within the same track. During
DVD playback, points A and B can be selected from different chapters.
[SLOW] Button
During DVD, VCD or SVCD playback, press SLOW for slow motion
playback. One you press SLOW, the disc will play at different speed.
Press PLAY to resume normal playback.
[TITLE] Button
While playing back a DVD, press the [TITLE] button to display the DVD
title menu or play back the first title when the DVD disc doesn’t support
the title menu. This function depends on the disc type.
[REPEAT] Button
Each press of the REPEAT button will change the repeat mode.
During VCD, CD playback, there are three modes: repeat Single, repeat
ALL and Off.
During DVD, playback, there are three modes: Repeat Chapter, Repeat
Title and OFF.
Note: During VCD playback, the PBC mode must be set to Off
HOME DVD PLAYER V10M10_IM_EN_12212007
www.jWIN.com
23
VOL
–
+
MUTE
ZOOM
ANGLE
LANGUAGE
SUBTITLE
P/N
AUDIO
STEP
OPERATIONAL INSTRUCTIONS
[VOL] Buttons
Press the [VOL +] button to increase the volume. Press the
[VOL -] button to decrease the volume.
[MUTE] Button
Press the [MUTE] button to mute the audio output. To resume the normal
audio output, press the [MUTE] button again.
[ZOOM] Button
While playing back a DVD, press the [ZOOM] button to zoom in or out
the image. This function differs depending on the type of disc.
[ANGLE] Button
While playing back a DVD, press the [ANGLE] button to view the scenes
from the different camera angles. To go back to the normal playback,
press the [ANGLE] button repeatedly until the angle function is turned off. A DVD
must support the different angle view to activate this function.
[LANGUAGE] Button
While playing back a DVD, press the [LANGUAGE] button to select an
audio language or format. This function depends on the DVD.
[AUDIO] Button
During DVD/SVCD playback, press the [AUDIO] button to select different
audio languages.
During VCD/CD/MP3 playback, the [AUDIO] button acts as L/R key to
switch LEFT/RIGHT/MIX/STEREO.
[SUBTITLE] Button
While playing back a DVD, press the [SUBTITLE] button to turn on the
subtitle and to select the language for the subtitle. This function depends
on the DVD.
[STEP] Button
Press the [STEP] button to play the DVD/VCD one frame at a time.
Press the [PLAY] button to resume normal playback.
[P/N] Button
Press the [P/N] button to select the video signal format for your TV. Each
press will change the video signal format as follows: PAL, AUTO, and
NTSC. If you select a wrong video signal format, press the [P/N] button
repeatedly until the image is displayed correctly on your TV screen.