Filter
Top Products
Setting up TV stations
17
EN
()MoveO}{Adjust
Memory/Erase Memory
Channel 6
Fine 0O0
()MoveO}{NEXTOMENU
AutoOprogram
ManualOprogram
FavoriteOch.
()MoveO}{NEXTOMENU
AutoOprogram
ManualOprogram
FavoriteOch.
Auto Oprogram }{
Memorizing the Channels with Auto programe
- For Auto to work, the programming source must be con-
nected to the TV and the TV must be receiving program-
ming signals either over-the-air or from a cable-type ser-
vice provider.
Add/Delete Channels with Manual program
- You can manually include or erase individual channels.
1. Repeatedly press the MENU button to select the
Station menu.
2. Press the
DD
/
EE
button to select Auto program.
3. Press the GG button to begin the channel search.
• Wait for auto program to complete the channel
search cycle before choosing a channel. The TV
scans for over-the-air channels and then channels
provided by a cable service.
1. Repeatedly press the MENU button to select the
Station menu.
2. Press the
DD
/
EE
button to select Manual program.
3. Press the
DD / EE
button to select a channel you want to
add to memory or erase.
4. Press the FF / GG button to select Memory (add) or
Erase (delete).
5. Press the
DD
/
EE
button to select Channel.
Select the desired programme number (0 to 99) with
the FF / GG button or NUMBER buttons. Any number
under 10 is entered with a numeric ‘0’ in front of it, i.e.
‘05’ for 5.
6. Press the EXIT button to save and return to TV view-
ing.
The current channel is added to Memory or Erased from
the channel list.
The display Stored will appear.
NOTES
• When the channel search is complete, use the
DD / EE
but-
tons to review the memorized channels.
• If you press the OK button in Auto, the function will stop
and only channels programming up to that time will
remain.
• Auto function can memorize only the channels which are
being received at that time.