Filter
Top Products
9.3.2. TV Display
Inside navigate toVIDEO SETUP PAGE TV DISPLAY
and press Here you can select the TV shape ofENTER.
the display. Normal/PS(pan scan) and Norma/LB(letter
box) should be selected when connected to a standard
4:3 TV. Wide Screen should be selected when connected
to a 16:9 wide screen TV.
(During playback of a wide screen recorded DVD disc
the TV screen will be not fully filled, regardless of the
TV display setting when connected to a standard 4:3 TV,
with the top and bottom of the screen left black.)
9.3.3.Component
Note: If TV screen has no output after selecting
, you can press key once, then pressP-SCAN SETUP
RECALL PSor key to recovery, or you can switch off
the power supply, reset the player, and then press
RECALL PSor key.
Inside navigate toVIDEO SETUP PAGE COMPONENT
and press You can set the YUV output toENTER.
PROGRESSIVE INTERLACE.or
P-SCAN:When connected to a progressive scan compatible
TV using component out connections, select P-SCAN.
INTERLACE: When connected to a standard TV using
S-Video or RCA connections, select INTERLACE.
If you select connection, you should set up the playSCART
mode as state, then it will output nomally.RGB
31