Filter
Top Products
5 www.k2mounts.com
3.
1.
2.
Attach the Screen Plate to the Screen
1. Line up the holes in the Screen Plate with the holes
on the back of the screen.
2. If the screws that came with your screen hold the
plate securely, use them, otherwise use screws from
those provided in the Screen Hardware bag.
3. Attach the Screen Plate with a washer and then a
screw in each hole.
Attach the Screen Plate to the Arm
1. Using the hex wrench provided in the Screen Hardware bag,
remove the upper hex screws protruding from the arm. Then
hook the bottom of the Screen Plate on the bottom hex screws
protruding out of the sides of the arm.
2. Slowly rotate the screen so that the top slot lines up with the
screw hole at the desired viewing angle.
3. Install a hex screw in the left side of the Screen Plate.
4. Install the second hex screw in the right side of the Screen Plate.
5. If the screen needs to be rotated, adjust the rotation using the
hex screw on the back of the screen plate between the upper
two hex screws.
6. Tighten all the hex screws.
5.