Filter
Top Products
23
Connection example motorhome - 12 V battery connection (UFD 170)
Installation and connection
Attention:
For operation with two batteries, it
must be ensured that the ignition
signal earth has the same potential
as the power supply battery earth for
the UFD 170 combi receiver.
Non-compliance means that the
automatic lowering function will not
work!
Note:
To prevent damage to the
HTV 115 electronics, it must
be ensured that the supply
voltage is in the range 10.5 to
14.5 V.
If your charger does not
guarantee this, contact a
specialist in vehicle electrics.
Fig: G
8-pole
6-pole
brown
white green
Battery
Ignition
HTV 115 TV set
External
IR sensor
Cigarette lighter
socket or 12 V
standard socket,
DIN ISO 4165