Filter
Top Products
33
Press the
%
(yellow) button once (twice for portal
channels) to view further audio selection options, if
these are transmitted by the channel provider. Use
the
buttons to scroll through the available
selection options. Press the
%
(yellow) button again,
or press the
button to exit this display again.
OPTION SELECTION
“Weak or no signal” indicates that an error has occurred in the reception system or in the receiver settings,
or that the transponder is not transmitting.
Check the Sat IF connection and the LNB confi guration. If you have changed settings, compare them against
the basic settings (provided you had made a note of them as suggested).
ERROR SIGNALLING
CHANNEL LIST – TV/RADIO
ON-SCREEN DISPLAYS (OSD)
Also pay attention to the bars at the
bottom of the on-screen display!
These provide
information on what to
do next.
Press the
button to access the
channel list.
When you open this list the channel list selection / sort order is displayed from where you selected the last
channel.
At the top left you will see the selected channel list (TV Channel or Radio Channel) displayed.
Press the
&
(blue) button to switch between the TV and radio channel lists.
Select the channel using the
buttons
. You can also however select the sub-channels of a portal
channel directly using the
buttons, without having previously pressed the
%
(yellow) button.