Filter
Top Products
11
Connection and set-up
TV and Video recorder connection
Connect the satellite receiver (TV Scart socket) and the TV
set using a Scart cable (see “Connection example”).
If your TV has a stereo feature, you can receive the sound
in stereo via the Scart connection.
Also connect the satellite receiver (VCR/AUX Scart socket)
and the video recorder/PVR using a Scart cable.
If you are recording using an external video recorder,
remember not to operate the receiver during recording,
otherwise all the on-screen displays will appear on your
recording.
Audio connection
If you want to play the sound on your Hi-Fi system, connect
the audio cinch sockets to the input sockets on the Hi-Fi
system with an appropriate cable (see “Connection
example”).
Dolby connection
The Dolby Digital output (electrical/optical) is intended for
connection to a Dolby Digital system (see “Connection
example”).
Inserting batteries into the remote control
Remove the cover on the rear of the remote control.
Insert the two supplied batteries into the remote control.
Ensure correct polarity of the batteries; the + and – markings
are indicated inside the battery compartment.
Slide the cover back into the housing until it locks in place.
Used batteries are special waste!
Do not throw spent batteries into your domestic waste; take
them to a collection point for old batteries!
Electronic equipment is not domestic waste - in accordance
with directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL dated 27
th
January
2003 on used electrical and electronic appliances, it must
be disposed of properly.
Please take this unit to a public collection point intended for
this type of disposal at the end of its useful life.