Filter
Top Products
40
Setting and activation
Path: MENU>Main menu>Satellites 1...8>Orbit position
1. Select Orbit position 1…4
2. Select Uncom switch
The “Uncommitted switches” function is activated in menu
item 2 = “Uncom switch”, by switching from “OFF” to a value
between 1 and 16.
Transmission takes place with the “FX” byte.
The following matrix shows the associated DiSEqC
sequences:
US = OFF DiSEqC™: = [E0 10 38 FY]
US = 1...16 DiSEqC™: = [E0 10 39 FX]
<25 ms>
[E0 10 38 FY]
In the DiSEqC menu (path: MENU>Main menu>
Installation>DiSEqC™) if the option DiSEqC™ Repeat
is set to 1, then the DiSEqC™ sequence repeats after
100 ms.
US = OFF DiSEqC: = [E0 10 38
FY]
<100 ms>[E1 10 38 FY]
US = 1...16 DiSEqC: = [E0 10 39 FX]<25 ms>[E0 10 38 FY]
<100 ms>[E1 10 38 FY]
Enable
ON The selected satellite is enabled for your reception
system (only the ASTRA satellite is enabled at the
factory)
OFF The selected satellite is disabled.
Satellites