Filter
Top Products
17
FIRST INSTALLATION: Single-cable system (automatic)
AUTOMATIC
Secure channel with PIN (only for on selection of “User defi ned” or “Kathrein EXU 908”):
Press the
button to switch to the “Secure channel with PIN” line. Here it is possible to protect the
transmission frequency used by entering a PIN. No other receiver can then use that transmission frequency
unless the PIN is input. Select the setting “Yes” using the
buttons.
Password PIN (only for “Yes” setting in the “Secure channel with PIN” line):
Select the “Password PIN” line using the
button. You can now use the number buttons to enter a
PIN (0-255).
Testing connection:
Use the
button to switch to the “Test connection” line and press the
button. The receiver now tests
the settings you have made. The following message appears:
Select a spare transmission frequency using the
buttons and then confi rm your selection
using the
button. The following screen appears:
You can only use the
“Secure channel with
PIN” function if this
function is supported
by the single-cable
components used. In
the case of Kathrein
single-cable components, this
is currently only the case for the
EXU 908.