Kathrein UFS 733si Satellite TV System User Manual


 
52
BOX SETTINGS
VIDEO SETTINGS
Use the

buttons to select the line you want to change. Use the

buttons to make the
changes.
Screen Format:
Select your TV's format here. Either 4:3 or 16:9/wide screen TV
Picture Scaling:
Select here how the picture from the channel provides is to be adjusted by the receiver if it does not
match your setting (4:3 or 16:9).
For screen format 4:3: Either Letterbox 14:9, Letterbox 16:9 or Pan & Scan/CCO
For screen format 16:9: Always 16:9 or Automatic
HDMI Output:
If you receiver is connected to an HDTV using an HDMI cable, press the
button to make the settings.
The following settings are then available (make the selection using the

button and the settings
using the

buttons):
- Image resolution: 576i, 576p, 720p and 1080i
- Test of coloured bars: Press the
button to perform a test of coloured bars (only output
over HDMI)
- HDMI audio: “On” (digital audio is transmitted over HDMI) or “Off” (digital audio is
not transmitted over HDMI)
- Digital volume control: “On” or “Off”
Press the
button to exit the “HDMI Output” sub-menu.
Also note the bars at the bottom
of the on-screen display! These
provide information on what to
do next.