Filter
Top Products
49
MANUAL SEARCH
Use the
buttons to select which satellites you want to cover with a search.
Use the
buttons to switch to “Transponder” and select the transponder to be covered by the
search using the
buttons. You can also manually enter the transponder frequency, the symbol rate
and the polarisation in the next three lines using the number pad buttons or using the
buttons.
Use the
buttons to switch to “Network search” and use the
buttons to select whether
the additional transponders, not yet saved, found due to the networking of the transponders are also
be searched for new channels.
Using the
buttons switch to “Channels to search for” and select whether you want to search
only for free-to-air channels, only for encrypted channels or for all channels using the
buttons.
Once you have made all the settings, switch to the last line and start the search using the
button.
The displays once the search is complete are identical to those for the automatic search.
SEARCH FOR CHANNELS
Using the setting “Network search
On”, additional transponders, not
yet saved can be found by the
networking of the transponders.
They are then stored and searched
for new channels in the same way
as the existing transponders.