Filter
Top Products
DM-SG7(EN)
16
Operation of remote control unit
1
Remove the cover.
Insert batteries.
2
3
Close the cover.
¶ Insert two R6 (“AA”-size) batteries
following the polarity indications.
The unit can be turned on by plugging the power
cord into a power outlet and pressing the
(on/
standby) key of the remote control unit. After the
unit has been turned on, press the desired operation
key.
Operation
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
NotesNotes
Notes
Remote sensor
6 m
30°
30°
Reference operating range
¶ When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between pressing of keys.
2
1
2
1
Loading batteries