Kenwood DM-SG7 DVD Recorder User Manual


 
DM-SG7(EN)
36
Editing
1
Play the track to be divided.
Use the following procedure to divide a track into
two by inserting a track number in its middle. For
example, by inserting an additional track number
before the passage you are specially fond of, it is
easy to skip to there when you play the disc later.
Note that the track numbers of the tracks located
after the divided track are automatically incremented.
The preview function can be used for fine adjust-
ment while repeatedly listening to the track division
point.
3
When preview is to be performed
2
Press the EDIT key at the desired position.
Each press of the 4 ¢ keys switches the operation.
Editing is aborted if no operation has been performed for
8 seconds.
1 DIVIDE?
2 COMBINE?
3 ERASE?
4 MOVE?
This operation is also possible during play-pause.
Dividing a track during playback
(TRACK DIVIDE)
(
dB)
MANUAL
D
IVID
E
0
2
?
R
L
3
0130
10
5
1 Press the EDIT key
: Keys and control used in the operations de-
scribed on this page.
SET
EDIT
(
dB)
MANUAL
0
01<>
0
0
2
?
R
L
3
0130
10
5
If no preview is to be performed, press the ENTER key once and then go to step 4.
1 Set to track divide mode.
2 Preview execution
3 Perform fine adjustment of the division point.
4 Decide the division point.
SET
SET
(
dB)
MANUAL
D
IVID
E
+
2
00
R
L
3
0130
10
5
(
dB)
MANUAL
D
IVID
E
+
2
04
R
L
3
0130
10
5
(dB)
MANUAL
P
REVI
E
W
2
2S
R
L
3
0130
10
5
Repeated playback from the division point will be per-
formed for about 3 sec.
Fine adjustment of the division point is possible from the
point where the EDIT key has been pressed in 32 steps
of 60 ms (6/100 sec) (a range of about 2 sec).
(
dB)
MANUAL
o
k + ?
R
L
3
0130
10
5
2 Select “DIVIDE”
3 Set it
SET