Filter
Top Products
Preparations
English
13
Connecting to a TV with HDMI input terminalConnecting to a TV with HDMI input terminal
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players and
other AV devices. If you have an HDMI TV or a monitor, you can connect it to this player using an HDMI cable.
HDMI
HDMI cable (Commercially available)
Rear panel example (for Europe)
TV
About HDMI
HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Content Protection). HDCP is used to protect digital
content transmitted and received.
HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channel surround-sound audio,
HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several
cables and connectors), and communication between the AV source and AV devices such as DTVs.
Notes:
• Both PCM and Bitstream Audio out is available when the sample frequency is set to 48 kHz in HDMI connection.
• If Audio setup is set to bitstream and your TV does not support Bitstream Audio out in HDMI connection, audio sound may not be output-
ted or distorted.
• When the no sound or noisy sound are outputted with HDMI connection, set the Audio option [Dolby Digital, DTS or MPEG] in SETUP menu
to PCM or Off.
• If there is noise or lines on the screen, please check the HDMI cable.
• Not all HDCP-compatible DVI devices will work with this unit.
• If your HDMI TV does not support HDCP, the blue screen appears on the screen.
• If the abnormal picture appears on the TV screen, turn off the unit and then turn the unit on again.
• The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs avail-
able from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t
accept images in 60Hz can’t display an image from this unit.
• If you connect the DVD player's DIGITAL OUT jack to an amplifier or other equipment with a multi-channel decoder, select "Bitstream" to en-
joy Dolby Digital or DTS playback. (See page 17.)
• When the audio output option of DIGITAL OUT is set by the AUDIO setup, it is applied in both HDMI and digital out (Coaxial, Optical).
• When you use HDMI connection, you can change the resolution (576i (480i), 576p (480p), 720p, 1080i, 1080p) for the HDMI output. (See
page 20.)