Kenwood DVF-J6050 DVD Player User Manual


 
38
Chapter 4: OSD Operation
Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5
Chapter 6
Chapter 7
Chapter 8
4-2 Basic OSD Operation
Various operations can be performed by selecting the
OSD icons on the TV screen using the cursor button on
the remote.
Operation procedure
1. Press the ON SCREEN button to display OSD.
"MAIN" OSD :
28
-
:40 Play Set
Off
MAIN
TOTAL
Disc
5
Title
3
Chapter
3
EXIT
Only the "MAIN" OSD can be displayed when the button
is pressed in stop mode. (The up and down arrows shown
in the above figure are not displayed.)
When the button is pressed in a play mode, the OSD
can be changed by pressing the cursor up/down button.
"SOUND" OSD :
SOUND
Off
Off
ENG 5.1ch
1 Dolby
Off
EXIT
"VISUAL" OSD :
VISUAL
1
Interace
Progressive
Scan
1 ENG
EXIT
÷ If the on-screen message or OSD is displayed
outside the TV screen when using a widescreen TV
or similar monitoring device, set the "OSD
Position" setting to "Cinema". f
Example of menu display when a number is input:
28
-
:40 Play Set
Off
MAIN
TOTAL
Disc
5
Title
3
Chapter
3
EXIT
-
2 34
|
÷ When 5 and are displayed on the top and
bottom of the pull-down menu, the menu has
more pages above or below the current page. When
the cursor is located on the bottom edge, press the
cursor down button makes it possible to advance
to the next page. (When the cursor is located on
the top edge, press the cursor upward makes it
possible to return to the previous page.)
÷ " " and " " on the left and right edges of pull-
down menu indicates that pressing the cursor
button makes it possible to clear the pull-down
menu and move the cursor to the originally pressed
icon. (The same effect is also available by pressing
the RETURN button.)
4. Press the ENTER button to enter the selection in
memory.
÷ The OSD icon display varies depending on the
content of change.
When a group, title, chapter, track, folder, or file number is input
using numeric buttons, the pull-down menu display changes and
the input number blinks in it. (The figure on the right of the
input number shows the number of chapters in the disc.)
If you commit a mistake in the numeric button input, press
the RETURN button and restart the input from the beginning.
(DV-5900M)
(DV-5900M)
(DV-5900M)
(DV-5900M)
(DV-5900M)
2. Select an OSD icon by pressing the cursor up/down
button, then press the ENTER button to display the
pull-down menu.
÷ Press the cursor button to move the cursor. But the
cursor cannot be moved to the icons of currently
unavailable functions.
÷ The OSD includes icons with a variety of functions.
The displayed icons are variable depending on the
player status and played disc.
÷ When the cursor is located on the left or right end,
if you attempt to move the cursor toward the
outside, the cursor will move to the opposite end.
÷ To clear the OSD display, move the cursor to the
EXIT icon and press the ENTER button. (The same
effect can also be obtained by pressing the ON
SCREEN button.)
3. From the displayed pull-down menu, select the
desired item by pressing cursor button up/down
button or by inputting the desired item number using
0 to 9 , +10 and +100 button.
Example of pull-down menu display:
28
-
:40 Play Set
Off
MAIN
TOTAL
Disc
5
Title
3
Chapter
3
EXIT
1
2
3
4
5