Filter
Top Products
49
Chapter 5: Applied Operations
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
5-2 Switching the Play Modes
The play modes of the player include the program mode,
disc random mode and all random mode in addition to
the track mode for normal playback.
Select the desired play mode and enjoy disc playback in
many ways.
Program mode : Desired tracks in a desired disc can
be programmed in the desired order.
Random mode : Tracks can be played in a random
order.
Disc random mode : Tracks in a desired disc can
be played in a random order. p
All random mode : Tracks in all discs in the stocker
can be played in a random order. p
Track mode : Normal playback in order of tracks.
¤
÷ This function may be unavailable with certain discs.
÷ Some operations may be restricted depending on
the played disc or player status.
÷ When the played disc is a P.B.C.-compatible VCD,
its P.B.C. is on and you want to switch the play
mode, stop the player, press the P.B.C. button to
switch it off. ‹
5-3-1 Registering and playing the program
Operation procedure
1. In stop mode, press the PGM button.
÷ The “PGM” indicator on the front panel will light
up.
2. On the remote control unit, press the DISC SEL. but-
ton and select the disc number containing the track
to be programmed.
÷ The disc number can also be selected using the
DISC + (up)/– (down) button on the remote.
÷ The disc number can also be selected by rotating
the DISC knob on the front panel.
÷ Perform every step within 20 seconds after the
previous step.
÷ It is also possible to enter the disc number alone
without selecting a group and/or track number in
the program list. In this case, all of the tracks in
the disc will be played back.
÷ Newly programmed tracks are appended to the end
of the existing program.
3. Press the SET button.
÷ If you commit a mistake in the numeric button
input, press the CLEAR button and restart the input
from the beginning.
4. With a DVD AUDIO, select a group by pressing one
of 0 to 9 buttons on the remote.
÷ It is also possible to enter the disc number and
group number in the program list without selecting
a track number. In this case, all of the tracks in the
group will be played back.
5. Press the SET button.
6. Select a track number with 0 to 9 and +10 button.
7. Press the SET button to enter the track in the program
list.
÷ Up to 32 tracks can be programmed by repeating
steps 2 to 7 for each. No more tracks can be
programmed when the display shows "FULL".
8. Press the 3 button.
÷ Tracks will be played in the order they are
programmed.
÷ When the 4 or ¢ button is pressed during
playback, the track will be skipped in the direction
of the pressed button.
5-3 Program Playback
Use the following procedure to select desired tracks (up
to 32 tracks) from different discs and program them in
the desired order. (Program playback is not available with
DVD VIDEO, MP3)