Filter
Top Products
84
Chapter 7 : Various Setups
Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5
Chapter 6
Chapter 7
Chapter 8
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "VISUAL" menu of "SET UP MENU".
2. Press the ENTER button to open the setup screen.
(DV-5900M)
¶ The "NTSC = PAL", "SCART Output Select" and
"Black Level Setup" settings are not displayed in
certain countries and areas.
3. In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up or down button
and press the ENTER button.
4. Select the Setting Item (refer to Right Table) by
pressing the cursor up or down button, then press
the ENTER button to enter the selection in memory.
¶ " " : Select to return to the previous screen.
Icon
Function
Icon
Means
Initial Position
DV-5900M
Other
Switches if the signal from an
NTSC format disc is to be
converted into PAL or not.
NTSC = PAL
DVF-J6050
On
Off
Europe and
U.K. = On
Except for
Europe and
U.K. = Off
Select to enable conversion from
NTSC to PAL.
Select to disable conversion from
NTSC to PAL.
–
Switches the output signals from
the TV SCART connector.
SCART Output
Select
(U.K. and
Europe only)
Composite
S
RGB
Composite video signal.
S Video signals.
RGB signals.
Composite
–
Black Level
Setup
DV-5900M
DV-5050M
7.5 IRE
0 IRE
–
7.5 IRE
Table : SET UP MENU “VISUAL” Function & Setting (3/3)
Function Item Setting Item
This function makes the
adjustment of the black level. Set
to your preference and monitor's
ability.
Standard black level.
Expanded black level.
EXIT
MENU
Disc Menu Language
Audio Language
Subtitle Language
Still Mode
FL Mode
Black Level Setup
Player Menu Language
VISUAL
7
English
7
English
7
English
7
Auto
7
English
7
0 IRE
7
Brightness