Filter
Top Products
45
Knowledge
DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)
÷ A viewing restriction (RATING) has been set
for the disc.
÷ You have forgotten the viewing restriction
(RATING) password.
÷ The DVD disc being played does not contain
the recording of the selected voice or subtitle
language.
÷ The function for displaying message on the TV
screen (On-Screen Messages) is set to off.
÷ The menu language function (MENU) is not
set.
÷ DVD disc cannot be played when the se-
quential mode of the player is set to "SEQ.2".
÷ Menu playback is not available when P.B.C.
is Off or the sequential play mode of the
player is set to "SEQ.2".
÷ The operation is inhibited. Please try an-
other operation.
The inhibition icon is displayed
and remote control is not pos-
sible.
÷ Playback is restricted intentionally by the
software producer.
DVD player unit
÷ Check the viewing restriction level (RAT-
ING) setting.
÷ Set the initial setup to the factory setup
with the following procedure.
1
In Power ON condition, keep the DISC 3 key and
the 4 (Skip) key pressed at the same time.
2 When both keys are pressed, the region
code of the unit, the software version,
etc. will be displayed on the display.
(When nothing is done, the display of this
information continues.)
3 Press the DISC 4 key and the 4 key at
the same time. "BYE" will be shown on the
display.
4 Press the POWER ON/OFF switch to go to
Power OFF.
5
When Power ON is performed with the
POWER ON/OFF
switch
, the settings be-
come the default factory settings.
÷ Use a DVD disc containing the recording of
the selected voice or subtitle language.
÷ Set On-Screen Messages to on.
÷ Set the disc menu language function
(MENU) as required.
÷ Switch it to "SEQ.1". *
÷ Switch it to P.B.C. On or "SEQ.1".
*‡
Playback will not start even after a title is se-
lected.
The viewing restriction level (RATING) can-
not be changed.
The voice or subtitle language selected in the
initial setting is not played.
No message appears on the TV screen after
a key is pressed.
Menu screen messages are not shown in the
desired language.
DVD disc cannot be played.
P.B.C.-compatible VCD cannot be played with
menu playback.
Remote control unit
Remote control operation is not possible.
÷ Batteries are exhausted.
÷ The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.
÷ Replace with new batteries.
÷ Operate the unit inside the remote control-
lable range.
Inhibition icon
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Cor-
poration and other rights owners. Use of this copyright pro-
tection technology must be authorized by Macrovision Cor-
poration, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Cor-
poration. Reverse engineering or disassembly is prohibited.
[ For U.S.A. and Canada ]
Consumers should note that not all high definition televi-
sion sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of 525
progressive scan picture problems, it is recommended that
the user switch the connection to the "STANDARD DEFI-
NITION" output. If there are questions regarding our TV set
compatibility with this model 525p DVD player, please
contact our customer service center.
"DTS" and "DTS Digital Out" are trade-
marks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
RemedyCauseSymptom
RemedyCauseSymptom
RemedyCauseSymptom
In case of difficulty