Kenwood DVF-R9030 DVD Player User Manual


 
Settings
Chapter 2: Various Setups
35
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "Disc Menu Language"
by tilting the joystick up or down and press
ENTER
.
7
Other
-
-
-
-
7
Disc Menu Language
Audio Language
Subtitle Language
Still Mode
FL Mode
SCART Output Select
NTSC = PAL
Player Menu Language
7
Italian
7
Spanish
7
French
7
German
7
English
5. Select the language by tilting the joystick up or
down, then press
ENTER
to enter the selection in
memory.
When "Other
----
"is selected, set the mode
switch of the joystick remote to the Orange
position, input the desired code No. using the
numeric keys and press the ENTER button.
If you make a mistake when pressing numeric
keys, press the C button and restart the code No.
input from the beginning.
"Audio Language" Setting
This setting makes it possible to select the language
used to reproduce the audio recorded in the disc in
the desired language. (If the selected language is not
used in a specific disc, the language specified as the
priority language for the disc will be used.)
At the factory, the audio language has been set to
"English".
Setting items
"
" : Select to return to the previous screen.
"Original" : Select to reproduce audio in the
language specified as the priority language by
the disc.
"English" : Select to display menus in English.
"French" : Select to display menus in French.
"Spanish" : Select to display menus in Spanish.
"German" : Select to display menus in German.
"Italian" : Select to display menus in Italian.
"Chinese" : Select to display menus in Chinese.
"Other
----
" : Select to specify the language
using a code No. listed in the "Disc Language
Code Table".
The languages displayed with this setting item
are variable depending on country and area.
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
and
tilt the joystick up or down to display the "VISUAL"
menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "Audio Language" by
tilting the joystick up or down and press
ENTER
.
7
Other
-
-
-
-
7
Disc Menu Language
Audio Language
Subtitle Language
Still Mode
FL Mode
SCART Output Select
NTSC = PAL
Player Menu Language
7
Italian
7
Spanish
7
French
7
German
7
Original
7
English
5. Select the desired audio language by tilting the
joystick up or down, then press
ENTER
to enter the
selection in memory.
When "Other
----
"is selected, set the mode
switch of the joystick remote to the Orange
position, input the desired code No. using the
numeric keys and press the ENTER button.
If you make a mistake when pressing numeric
keys, press the C button and restart the code No.
input from the beginning.