Filter
Top Products
Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Do not plug in the power lead
until
all connec-
tions are completed.
Caution
Be sure to adhere followings. Or proper ventilation WI/ be blocked causrng damage or
fire hazard.
. Do not place any objects imparrrng heat radration onto the top of unt.
l
Leave a space around the unrt (from the largest outside dimensron rncludrng pro-
lection) equal or greater than, shown below
Top panel : 50 cm
Side panel : 10 cm
Back panel 10 cm
Malfunction of microcomputer
If operation IS not possible or erroneous
drsplay appears even though all connec-
tions have been made properly, reset the
mrcrocomputer referrrng to “In case of
drfficulty” -I&
I ’
I
I
d I
tube
Excessive insertion of the cable can
cause defective contact.
The figure shows an example for the speakers for DVR-605.
Front
Center speaker
speaker
L
Connect the speaker cable terminals
to the terminals with the same color
at the speaker terminal panel on the
main unit. Connect matching the
color of the speaker terminal (+ side)
and the color of the speaker cable
tube.
Speaker
Color of the speaker terminal
panel
on the main
unit
Front right
Red
Center
Green
Front left
White
Surround right Gray
Subwoofer
Purple
Surround left Blue
Surround
speaker
R
Surround
speaker
L
Subwoofer
Speakers for DVR-6100/6100K
The power in this equipment will not be completely cut
off from the AC wall outlet when the main switch is