Filter
Top Products
t out some sound
‘q4$ _: j_ .f+ew
Preparation
)
ONI OFF
cE=
‘5
”
l
set
the
POWER
switch to the
ON
(-1 position
Basic use method
m
Selecting the desired input
VOLUME CONTROL
L
INPUT
I
I
POWER
PHONES
Switching is done as follows when the INPUT key of the
main unit is pressed. (The parenthesized part shows an
operating example.)
@Tuner (frequency display)
@ VCR (VCR --+ ANALOG + VCR)
@ SAT/CABLE (SAT/CABLE 3 AUTO + SAT/CABLE)
@ FRONT AUX (FRONT 3 OPTICAL 3 FRONT)
0 DVDICD
H
Volume adjustment
To increase
To decrease
l
When one of the keys on the left IS pressed while STANDBY
mode, the power will be switched on automatically and the input
WIII be selected
l
The power WIII be switched on and the respective operation WIII
be performed also when the
OPEN/CLOSE
key, the
PLAY/
PAUSE
key or the
BAND
key on the maln unit IS pressed during
STANDBY mode.
l
WhenadlscIssetlnthedlsctrayandtheDVDCDkeyIspressed,
disc playback will start automatically
The present mode of the remote control unit may not
l
When using the remote to select SAT or CABLE,
SAT (SAT 3 AUTO --f SAT)
CABLE (CABLE 4 AUTO + CABLE)
a
The input mode can be switched with SAT/CABLE
Note and FRONT AUX.
Refer to “Changing the INPUT MODE” -I-$
Normally “MAX” IS dlsplayed when the volume settings set to
the maximum value
If you have adjusted the speaker level above Odb with the
TRIM
key (-Lx), “MAX” WIII not be dlsplayed.
l
Press the
MUTE
key.
l
Press agaln to resume the orIgInal volume.
l
The sound muting IS also canceiled when the volume IS con-
trolled.
Inset-t the headphone plug into the PHONES jack.
This unit offers various surround modes, but It switches
automatically to stereo mode when headphones are connected.
To open the door, pull the lower part on the right side of the
main unit
l
The sounds from all speakers are cut off.