Kenwood DV-6050 DVD Player User Manual


 
50
Chapter 6: Various Setups
Various Setups
"Speaker Setting"
This unit has two kinds of speaker setting methods.
"Speaker Setting (Custom)"
This is the normal setting operation.
"Speaker Setting (Quick)" W
This is the simplified setting operation.
"Speaker Setting (Custom)"
At the factory, the player has been set to the standard
setting with which the speakers can reproduce the 6-
channel signals as soon as the connections are made.
This setting can be changed according to each listening
environment. When you want to change this setting, be
sure to perform it in the listening area in your own
listening environment.
Center speakerC
Size
Surround speakerLS, RS
Normal
Large
Icon
Speaker Icon Function
Initial
Position
Means
Center channel output
ON/OFF
Low cut filter
Front speakerL, R
Size Low cut filter Large
Select "Normal" when the
connected speaker is incapable of
reproducing audio below 100 Hz.
Icon
Select "Large" when the
connected speaker can
reproduce audio below 100 Hz.
Speaker Item Function Item Setting Item
Off
Normal
Large
Select "Off" if the center speaker
is not used.
Select "Normal" when the
connected speaker is incapable of
reproducing audio below 100 Hz.
Select "Large" when the
connected speaker can
reproduce audio below 100 Hz.
Large
0 dB0 to -12 dB
Surround channel output
ON/OFF
Low cut filter
Off
Normal
Large
Select "Off" if the surround
speaker is not used.
Select "Normal" when the
connected speaker is incapable of
reproducing audio below 100 Hz.
Select "Large" when the
connected speaker can
reproduce audio below 100 Hz.
Large
0 dB0 to -12 dB
Table : "Speaker Setting (Custom)" Function & Setting (1/2)
Level Set the volume level 0 to -12 dB
––
0 dB
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up/down button to display
the "SOUND" menu of "SET UP MENU".
2. Press the ENTER button to open the setup screen.
3. Press the cursor up/down button to select "Speaker
Setting (Custom)" in set up menu "SOUND", then
press the ENTER button.
Level Set the volume level
––
Set the volume level
Size
Level
––
Test
C
SW
R
RSLS
Exit
L
Speaker Setting (Custom)
0 dB
10
ft
0 dB
10
ft
0 dB
10
ft
5 ft 0 dB0 dB
LS
R
RS
L
SW
C
0 dB
0/10/20/30
––
10 ft
Distance
0/10/20/30
––
10 ft
Distance
E
E
0/10/20/30
––
5 ft
Distance
E