Filter
Top Products
Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
Displaying the Car Type Set Up
screen
If your vehicle type is selected, the Digital Time
Alignment is set automatically (for timing adjustment of
sound output for each channel) to have the highest
surround effects.
Car Type Set Up screen
Audio Set U
p
9
Selects a speaker to be set.
(see <Speaker Set Up>, page 62)
p
Selects a speaker type.
(see <Speaker Set Up>, page 62)
q
Stores your setup in memory.
(see <Speaker Setup Memory>, page 65)
w
Displays the Speaker Crossover Setup screen.
(See <Crossover Network Setup>, page 65)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
e
Set the use or no use of tweeter.
(see <Speaker Set Up>, page 62)
r
Displays the Channel Level Setup screen.
t
Displays the Car Type Set Up screen.
y
Selects a speaker to be set.
(see <Channel Level>, page 63)
u
Sets the speaker volume.
(see <Channel Level>, page 63)
i
Starts or stops test signal tone output for setup
check.
o
Displays the Speaker Set Up screen.
Your setup on the <Sound Effects Menu> is
adjusted automatically to get the best sound
effects according to the car type and speaker you
have set on the <Audio Set Up> (see page 60). We
recommend you to complete the <Audio Set Up>
first, then set up the <Sound Effects Menu>.
You can fine-adjust the automatic set value by
<DTA Setup> (see page 64), <Crossover Network
Setup> (see page 65), or <Parametric Equalizer>
(see page 91).
Setup Menu
1
Adjusts the volume.
2
Returns to the Control screen of the previous
source.
3
Calls the Sound Effects Menu. (see page 86)
4
Calls the Setup Menu.
5
Sets up the car type you use together with this unit.
6
Displays the DTA (Digital Time Alignment) Setup
screen. (see page 64)
You can adjust the digital time alignment that was
set automatically when you selected the car type.
7
Call the DTA screen setup from memory.
8
Displays the Speaker Set Up screen.
If is not shown, touch
or to display it.
N
e
xt
P
r
e
v.
Audio Set U
p
Preset
MENU
DTA
1
1
1
1
4
8
7
5
5
6
3
2
+10 dB
+1
16
19
17
17
18
English
English 6160 English
Audio Set Up
You can set up the car type and speaker system you use together with this unit.
9
11
10
10
12
13
14
15