Kenwood KVT-915DVD DVD Player User Manual


 
Setup Menu
DTA Setup
Manually set the sound output timing of each
channel.
(P60
6
)
DTA Setup screen
1
Selects a speaker to be adjusted.
2
Sets a delay time of the selected speaker.
3
Stores the adjusted status in memory or calls it
from memory.
4
Returns to the Car Type Set Up screen.
1
Center speaker
2
Front speaker
3
Rear speaker
4
Subwoofer
Select a speaker you wish to adjust
2
DTA
Display the DTA Setup screen
1
The speakers are virtually moved to the desired
distance.
When the values of center speaker and front
speakers increase, they are virtually moved forward.
When the values of rear speakers and subwoofer
increase, they are virtually moved backward.
To store your setup in memory
Continue to touch more than 2 seconds.
To call your setup from memory
You can also call the setup from memory by touching
7
on the Car Type Set Up screen.
Preset
Preset
Preset
Store or call your setup into/from memory
Set a delay time
3
Crossover Network Setup
You can manually set a crossover frequency of
speakers.
(P61
w
)
1
Sets a crossover frequency.
2
Sets a crossover slope.
3
Returns to the Speaker Set Up screen.
4
Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
• When you select a speaker type from the
Speaker Setup screen, the crossover
frequency setup is erased.
• During crossover setup, the speaker type is set
to "USER" on the Speaker Set Up screen.
X'Over
Speaker Setup Memory
You can store all of speaker and crossover
setup in memory simultaneously.
To store your setup in memory
(P61
q
)
Continue to touch more than 2 seconds.
To call your setup from memory
(P61
q
)
Preset
Preset
English
English 6564 English
Return
Preset
ront
F
F
F
Fro
Fro
Fro
ron
0.50feet
0
5
0.5
50f
.50
DTA
DTA
DTA
DTA
D
2
2
3
4
1
2
3
2
3
4
1
Normal
Phase
Return
Frequency
y
18dB/Oct
Slope
100Hz
1kHz
LPF
1
1
2
2
3
4