Filter
Top Products
HDMI Operation for the
Showcase DVD
Power on the Showcase DVD and turn on your HDCP compatible display
device. In most cases, you see one of the resolution lights illuminate,
indicating the default resolution of your monitor. This resolution is detected
automatically by the Showcase DVD circuitry. The resolution you prefer may
or may not be the same as the detected resolution. Press the HDMI button
to cycle through the available resolutions: 480p, 720p, or 1080i. For your
convenience, the Showcase DVD remembers the last resolution to which
it is set.
When you power on, and no HDMI resolution light illuminates, try pressing
the HDMI button anyway. Some video displays do not provide intelligible
information to the auto-detect circuitry in the Showcase DVD. Despite this
condition, it is likely that you will succeed in adjusting the resolution to your
preference by pressing the HDMI button. The lack of initial auto-detection
does not compromise the operation of the circuit in any way.
Please contact your authorized dealer, distributor, or Krell should you have
any questions or concerns, after completing the routine described above.
THE LEADER IN AUDIO ENGINEERING
Krell Technical Bulletin Showcase DVD withHDMI/October 2004
Krell Industries, Inc., 45 Connair Road,Or
ange, CT 06477-3650 USA
TEL 203-799-9954, FAX 203-891-2028, E-MAIL krell@krellonline.com
WEB SITE http://www.krellonline.com
P/N 307550
v 04.0