Filter
Top Products
3 Using Your
TracVision L3/S3
For TracVision L3/S3 to receive the satellite signals, the antenna
must have a clear line of sight to the satellite. If you only receive
intermittent signals or the antenna cannot find the satellite, check
around your vehicle for any objects that could be blocking the
signal, such as trees, buildings, highway overpasses, etc.
You must also be located within the selected satellite’s coverage
area in order to receive its signal. Refer to your satellite television
service manual to check the viable coverage area. For your
convenience, KVH provides links to several web sites that offer satellite
coverage information. Simply go to our web site at: www.kvh.com/
footprint.
3.1 Turning On the System
The TracVision L3/S3 system is easy to use. Antenna unit
initialization and satellite acquisition are completely automatic.
To use the TracVision L3/S3 system:
1. (TracVision S3 only) Park your vehicle.
2. Turn on the IRD and the television. (Refer to your
IRD user manual for complete operating
instructions for the IRD.)
3-1
Using Your TracVision L3/S3
54-0157 Rev. G
To minimize the time it takes the
antenna to acquire the satellite, do
not change the channel during the
startup process or cable unwrap.
Figure 3-1
Be Aware of Objects that Might
Block the Satellite Signals
The TracVision S3 is for stationary
use only. The TracVision S3 is not
designed to track the satellite when
the vehicle is moving.