Filter
Top Products
Push [SETUP], the screen will display system setting menu, the
moment you can push [UP], [DOWN] to move the high lighting
band to the desired item, push [ENTER] to display sub-menu. In
the sub-menu push [RIGHT] to enter inferior sub-menu. You can
push [UP], [DOWN] to move the high lighting band in all menu
pictures. Push [ENTER] your selection will be valid. Push [LEFT]
to escape the sub-menu in the right of the screen. Any time push
[SETUP]or[EXITSETUP]youwillescapesystemsettingstate.
The high lighting band
indicatescurrentitem
The explanation to the
current item
6. System setting
System setting
Following are some examples of frequent setting the user can
settingotheritemsfollowingtheirinstructions.
1.Push [SETUP] to enable the screen display the system
setting picture, make sure the high lighting band has been
located in GENERAL SETUP push [ENTER], TV screen will
displayfollowing picture.
Example1:SetTVscreenratiomode
Frequent operation
14
15
Attention:
While playing, you can
push[PREVIOUS]or[NEXT]
toplay theprevioustrackor
thenextone.
While playing you can
push [STOP] to back to the
menupicture.
There are two kinds of file disc play mode:1. No-menu play mode.2.
Menu play mode. The factory default play mode of this unit is no-menu
play mode. Please refer to the description on [SETUP] setting menu for
the information on the switching of play modes.
In the first play mode, after a disc is put into the player and the player
reads the disc, the player will go into [STOP] state and display [STOP]
on DVD display panel.
At this time, you can press a numerical key to select a file and play the
disc starting with the selected file or press [PLAY] key to play the disc
starting with the first file of this disc. This file may be either an MP3 file
or [MPEG] file. When an MP3 is being played, you can press [DISPLAY]
key to view file play time.
Note:1.If you are not quite familiar with thisunitand press [PROG] key
Or select programming function through the menu when the discs
described above are played,error operations will be caused.
2. If your disc contains files of multiple formats, press [STOP] key after
the play of the disc is finished and display the picture that you can`t
usage [UP]or[DOWN ]key controled the menu.But you may press
Previous or Next key to view tracknumbers inthe list onthe rightside or
directly press a numerical key to select a track to play.
After a JPEG file disc is read out, you can press PLAY key to start
playing.