Filter
Top Products
Example3:Coaxialoutput
Iftheuserusecoaxialterminaltooutputaudiosignal,youneedto
set the audio output "SPDIF/RAW' or "SPDIF/PCM", you can
operatefollowingtheseprocedures:
Push [SETUP]to enableTV screendisplay system settingmenu
picture, please firstly enter general setting sub-menu,then
select the item "AUDIO OUTPUT" in the menu, then push
[ENTER],TVscreenwilldisplay:
2.Push [RIGHT] to enter the sub-menu in the sub-menu in the
right screen. If you want to setthe screen to "WIDE", firstly push
[DOWN]twicetomovethehighlightingbandto"WIDE'item,then
push[ENTER],
3.Push[MAINPAGE]toexitsystemsetting.
Notes:threescreenratiomodes,i,e,16:9WIDE,4:3PS,4:3Lare
availablefor your selection toenabledifferentdiscsto matchTV.
therelationship betweenthe videoofdisc andscreen ratiomode
areasfollows:
Example2:Setsoundmixoutputmode
1. Push [SETUP] to enable TV screen display system setting
menupicture,push[DOWN]tomovethehighlightingbandtothe
item"SPEAKERSETUP",push[ENTER],TVscreenwilldisplay
2. Push [RIGHT] to enter the sub-menu in the right screen, If you
2.Push [RIGHT] to enter the sub-menu in the right screen, push
[DOWN] to move the high lighting band tothe item "SPDIF/RAW"
or"SPDIF/PCM",thenpush[ENTER].
3.Push[MAINPAGE]toexitsystemsetting.
Special indications: if you are not going to use coaxial output
audiosignal,you need to set audiooutputto"ANALOG'output,so
there will be no audio signal to set audio output to "ANALOG"
output, so there will be no audio signal to be output in the
mixchannel.
Video of disc normal 4:3PS 4:3LB 16:9
16:9 16:9
4:3
want to set thesound mode to "STEREO", firstly push [DOWN]
once to move the high lighting band to "STEREO" item, then
push[ENTER].
3,Push[MAINPAGE]toexitsystemsettingpage.
System setting
System setting
16
17