Filter
Top Products
31
206-4096
Cloning Procedures
Learning / Teaching a Master TV Setup using a USB Memory Device
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Plug the USB memory device into the USB IN port on the Master TV.
3. Press MENU to display the TV setup menus.
4. Use the arrow navigation keys to select/highlight the Option menu icon; then, press
the number “7” key a total of seven times to display the USB Download Menu.
5. To gain access to the Learn From TV option in the USB Download Menu, key in the
password used to enter the Installer Menu (Example: Press 9-8-7-6).
6. Use the Up/Down arrow keys to select Learn From TV, and then press OK (Enter).
7. To identify the profi le from others, you can use the Up/Down arrow keys to change
the last fi ve digits of the fi lename. Press OK (Enter) when you are ready to initiate
Learning.
Learning status will be shown on the progress bar. When the Learning process is
complete, the USB Download menu will reappear on screen.
8. Remove the USB memory device from the Master TV.
Teach Master TV Setup to Target TV
1. Ensure the Target TV is in Pass-through Mode, and then plug the USB memory
device with the Master TV Setup fi le into the Target TV USB IN port.
2. Press MENU to display the TV setup menus.
3. Use the arrow navigation keys to select/highlight the Option menu icon; then, press
the number “7” key a total of seven times to display the USB Download Menu.
4. Use the Up/Down arrow keys to select Teach To TV, and then press OK (Enter).
5. Use the Up/Down arrow keys to select/highlight the Master TV Setup you want to
install and press OK (Enter). Note: Filenames identify the TV and the TLL version
(see fi gure at right).
Teaching status will be shown on the progress bar. When the Teaching process is
complete, the USB Download menu will reappear on screen.
6. When Teaching is done, remove the USB memory device, turn OFF the TV, and
unplug the TV power cord for 15 seconds.
7. Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should
be resident on the Target TV.
USB Cloning Notes
• Read the IMPORTANT CLONING INFORMATION on page 30 before beginning any cloning procedures.
• You may edit a fi lename as part of the Learning procedure; however, a fi le with edited contents will not
be recognized.
• It is not possible to clone a Master TV’s clock using a USB memory device. Either set a Target TV’s
clock manually or use the Auto Clock setting in the TV setup menus.
Learn From TV
Select the fi le name and press OK to start
xxLG3DDH-UA00001.TLL
Previous Enter
►
►
Learn From TV
UPDATING...
Do not unplug!
!
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Learn From TV
Teach To TV
xxLG3DDH-UA00001.TLL
Previous Enter
Exit Enter
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Learn From TV
Exit Enter
Teach To TV
UPDATING...
Do not unplug!
!
25%
50%