56
206-4232
Reference: Downloading a Splash Screen using a USB Memory Device
TV Software Update (Expert)
TV Software Update
LOGO Image Download
TV Software Update (Expert)
[ Current TV Software Version Information ]
EPK : 03.34.00
xxLP645H_v3_35_USB
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
EPK : 03.35.00
[ Forced Update Option ]
SPI Boot
LOGO Image
TXT : V1.00.017
xxLP645H_v1.00.18
The following software files are found in the memory card.
TV Software Update (Expert)
Splash Image 1360 X 768 ProCentric
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
TV Software Update (Expert)
TV Software Update
LOGO Image Download
Upgrade PTC Software
TV Software Update (Expert)
TV Software Update
LOGO Image Download
TV Software Update (Expert)
[ Current TV Software Version Information ]
EPK : 03.34.00
xxLP645H_v3_35_USB
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
EPK : 03.35.00
[ Forced Update Option ]
SPI Boot
LOGO Image
TXT : V1.00.017
xxLP645H_v1.00.18
The following software files are found in the memory card.
TV Software Update (Expert)
Splash Image 1360 X 768 ProCentric
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
TV Software Update (Expert)
TV Software Update
LOGO Image Download
Upgrade PTC Software
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Previous OK
Splash Screen Image File Guidelines
• The splash screen image must be a baseline (not progressive) JPEG.
• The image should be no larger than 1 MB.
• The maximum resolution allowed for a 32LP645H splash screen image is 1360
x 768 pixels (HD).
• The maximum resolution allowed for a 39/42/47/55/60LP645H splash screen
image is 1920 x 1080 pixels (FHD).
• Avoid using special characters, such as ?, -, etc., in the splash screen image
le name.
Downloading a Splash Screen Image
The following procedure describes how to download a splash screen image using
the USB Download Menu, though you may also use the new LG Smart Install
utility to download the splash image, if desired. See “LG Smart Install Utility” on
pages 18 to 19 for further information.
Before you begin this procedure, note that the splash screen image le must be
stored in a folder named “LG_DTV” in the root directory of the USB memory
device. Also, ensure the USB device has been formatted with FAT format.
1. Turn ON the TV, and then insert the USB memory device into the USB IN port
on the TV.
2.
Press MENU SETTINGS on the Installer Remote to display the TV setup
menus (TV is in Pass-through Mode) or the Function Menu (TV is not in Pass-
through Mode).
3. Use the arrow navigation keys to select/highlight either the Option menu icon
from the TV setup menus or the Lock menu icon from the Function Menu.
Then, press the number “7” key a total of seven times to display the USB
Download Menu.
4. Use the Up/Down arrow keys to select Upgrade TV Software, and then press
OK.
5. Select LOGO Image Download from the rst TV Software Update window.
6. In the second TV Software Update window, use the Up/Down arrow keys to
select the image le to download, and then press OK.
The TV will show download completion progress in a new window. Do NOT
remove the USB device until the image download is complete. When the image
download is complete, the TV will reset itself with an automatic restart. Upon the
restart, you should see the new splash screen.