Filter
Top Products
6
206-4186
Installation and Setup Checklist
__ Unpack TV and all accessories.
__ Install batteries in remote control.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.
Cable Connections
__ Make all connections to rear jack panel and RF
antenna on MPI/PPV card.
__ Make all connections to signal, interactive
resources, and Aux sources, as appropriate.
Commercial Mode Setup
__ Complete Commercial Mode Setup (configure
all relevant Installer Menu items as required of
your institution and configure display features
for the end user).
Software Installation
__ Install or configure any software, as applicable,
for example, PPV, etc.
Setup Checklist / Overview
Setup Checklist
Commercial Mode Setup Overview
This document describes how to set up LD340H and LD345H Pro:Centric™ TVs for Commercial Mode
while the TV/Embedded b-LAN™ (EBL) module is in either Pass-through Mode or Free-To-Guest (FTG)
Mode.
Note: The b-LAN module is internal to the TV and allows hotel/institution head end equipment with b-LAN
technology to communicate with the TV for configuration and control. See Reference section, “b-LAN Setup
& Overview,” for further information.
Pass-through Mode
This mode allows you to configure a Master TV Setup for cloning purposes as well as external VOD/PPV
control. Use the Installer Remote to congure Installer Menu items as required for TV operation and set up
TV features (Channel, Picture, Audio, etc.). See pages 12 to 13 for detailed information.
FTG Mode
This mode enables Pro:Idiom
®
decryption and also allows logical channel mapping of physical channels
to remove the need for dash tuning. FTG Conguration Application software is used to congure and/or
edit FTG Channel Map and FTG Installer Menu settings. With the LD340H/LD345H models, there are two
separate and distinct methods for conguring the TVs for the FTG Mode of operation. See pages 29 to 39
for information on FTG Mode options and using the FTG Conguration Application.