LG Electronics 42LD345H CRT Television User Manual


 
31
206-4186
FTG Mode of Operation Overview (Cont.)
PICTURE
AUDIO
INPUT
OPTION
TIME
MY MEDIA
CHANNEL
LOCK
TV Setup Menus
Shows that the TV is in
Pass-through Mode .
Function Menu
Indicates the TV (CPU or EBL) is not
in Pass-through Mode . While the TV is
in FTG Mode, Installer Menu settings
can be accessed as read-only.
ABC
ASPECT RATIO
Enter
Move
Set By Program
4:3
16:9
Zoom
Just Scan
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu
items will be read-only.
• Any FTG conguration changes must be made using the FTG Device Conguration Application. FTG
Channel Map Conguration and FTG Installer Menu Conguration Utilities enable you to make changes,
respectively, to the FTG Channel Map and FTG Installer Menu settings as necessary. Based on the initial
method used to congure the TV for FTG Mode operation (via CPU or EBL), all subsequent changes
must be transferred to either the TV or the EBL via a process that is in accordance or compatible with that
method (see information on local conguration in this document or refer to documentation for the head
end device/server for information on remote management).
• If it becomes necessary to reset the TV to Pass-through Mode, there are several options that will enable
you to do so. Refer to Reference section, “Resetting Factory Defaults on the TV(s),” for further information.
Pages 37 to 40 provide overviews of the FTG Channel Map, FTG Installer Menu, and FMA Configuration
Utilities that comprise the FTG Device Configuration Application. Refer to the Free-To-Guest (FTG)
Configuration Application manual for further information on the FTG Device Configuration Application.
Determining the TV Operating Mode
To determine the operating mode of the TV, press MENU on the Installer Remote. The menu display
alternates based on the operating mode. See examples below.
If the end user Function Menu appears, typically the TV is in FTG Mode. If the TV setup menus appear,
the TV is in Pass-through Mode.