Filter
Top Products
34
206-4186
Learn From TV (FMA)
Select the le name and press OK to start
xx0BAL-PLAT200001.FMA
Return
Enter
►
►
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (FMA)
Learn From TV (TLL)
Learn From TV (FMA)
Return Enter
Learn From TV
UPDATING...
Do not unplug!
!
25%
Note: It is highly recommended that you open this FMA Configuration
file in the FTG Device Configuration Application—BEFORE transferring
(Teaching) the file to any TVs—to verify FTG Channel Map and FTG
Installer Menu settings and enable Pro:Idiom decryption by marking
Encrypted channels. This will also enable you to confirm and add
channel attributes, labels, etc.
Learning an FMA Conguration File from a TV
To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FMA Configuration
file using the FTG Device Configuration Application as described on pages 32 to 33. However, if necessary,
this option enables you to save (Learn) an FMA Configuration file from an LD320H/LD325H or LD340H/
LD345H TV to a USB memory device.
Note: If the TV is NOT already in FTG Mode, you may need to perform some manual configuration on
the TV before you start this procedure (see “Optional Manual Conguration / TV Setup” on following
page).
FTG Mode via CPU (Cont.)
1. Plug a USB memory device into the USB IN port on the TV.
2. Press MENU on the Installer Remote to display the TV setup
menus (TV is in Pass-through Mode) or the Function Menu (TV is
already in FTG Mode).
3. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from
the Function Menu. Then, press the number “7” key a total of seven
times to display the USB Download Menu.
4. To gain access to the Learn From TV options in the USB Down-
load Menu, key in the password used to enter the Installer Menu
(Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (FMA), and
then press ENTER.
6. To differentiate this .fma le from others, you can use the Up/Down
arrow keys to change the last ve digits of the lename. Press
ENTER when you are ready to initiate Learning.
The TV will show Learning completion progress in a new window.
Do NOT remove the USB device until Learning is complete. When
Learning is complete, the USB Download Menu will reappear on
screen.
7. When you are nished, remove the USB memory device.