Filter
Top Products
ASSEMBLING AND PREPARING 29
/I" ...... "'-.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on tile rear of tile TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
i_ CAUTION
|. Make sure that children do not climb on or
/
[ hang on the TV.
- @ NOTE
• Use a platform or cabinet that is strong and
large enough to support the TV securely.
• Brackets, bolts and ropes are optional. You
can obtain additional accessories from your
local dealer.
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http.//www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
-@ NOTE
. The Kensington security system is optional.
You can obtain additional accessories from
your local dealer.
Downloaded From TV-Manual.com Manuals