Filter
Top Products
Owner’s Manual 77
Operation
Record
- While recording, you can change channels or inputs, without disturbing the recording. And the screen being
recorded will be shown in the lower-right corner of the main screen.
1. After starting an Instant Record or Reserved Record, change the channel or input.
•You can check the screen being recorded in the lower-right corner the main screen (as shown below).
•Press the PIP button to cancel or show the screen being recorded.
•Press the SWAP button to return the screen being recorded in Watch & Record.
•When changing to the channel being recorded in Watch & Record, screen is changed to Instant Record state or
Reserved Record state.
screen being recorded
• Watch & Record Input
0
X
0
0
Digital
Analog
Video
Front Video
Component1
RGB-PC/DTV
HDMI1/DVI
Digital Analog Video Front Video
00
00
00
00
00
00
00
00
00
00
00
0
0
00
00
Watch
Note: When digital broadcast is being recorded, another digital broadcast can not be tuned.
W
W
atching & Record
atching & Record
- if you turn the power off on recording, this message is displayed as shown below.
- If you selects Yes, recording stops and then power is off.
And if you selects No, recording continues and then power is off.
HDMI2
00
00
Component2