Filter
Top Products
30 Plasma Monitor
Operation
1. Press the MENU button and then use
DD / EE
button to select the SCREEN menu.
2. Press the GG button and then use
DD / EE
button to select Reset.
3. Press the GG button.
• You can initialize Manual config., Position, Split zoom, PIP size, PIP position, PIP transparency and sub pic-
ture size for DW.
Initializing (Reset to original factory value)
Initializing (Reset to original factory value)
- This function operates in every mode.
- To initialize the adjusted value.
Auto config.
ARC
Cinema
Position
Manual config.
NR
Reset
Black level adj.
PC/DTV Mode
Auto config.
ARC
Cinema
Position
Manual config.
NR
Reset GG
Black level adj.
PC/DTV Mode
To Set
Screen Menu Options continued
Screen Menu Options continued
Manual Configure (RGB-PC mode only)
Manual Configure (RGB-PC mode only)
- If the image still isn’t clear after auto adjustment is completed and especially if characters are still jittery, adjust the
picture Phase manually.
- To correct the screen size, adjust
Clock.
1. Press the MENU button and then use
DD / EE
button to select the SCREEN menu.
2. Press the GG button and then use
DD / EE
button to select Manual config..
3. Press the GG button and then use
DD / EE
button to to select Phase or Clock.
4. Use the FF / GG button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 31.
• The Clock adjustment range is -127 ~ +128.
5. Press the ENTER button to save the new settings.
Auto config.
ARC
Cinema
Position
Manual config.
NR
Reset
Black level adj.
PC/DTV Mode
Auto config.
ARC
Cinema
Position
Manual config. GG
NR
Reset
Black level adj.
PC/DTV Mode
Phase 0
Clock 0