Filter
Top Products
RS-232C
39
07. Color (Command2:i)
➜To adjust the screen color.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [ i ] [ ] [Set ID] [ ] [Data] [Cr]
[ i ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
08. Tint (Command2:j)
➜To adjust the screen tint.(Video/S-Video/Component)
T
ransmission
Data Red : 0 ~ Green : 64
* Refer to ‘Real data mapping2’.
Data Red : 0 ~ Green : 64
[k] [ j ] [ ] [Set ID] [ ] [Data] [Cr]
[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
09. Sharpness (Command2:k)
➜To adjust the screen sharpness.(Video/S-Video/Component)
T
ransmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [k] [ ] [Set ID] [ ] [Data] [Cr]
[k] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
10. OSD Select (Command2:l)
➜To select OSD On/Off.
Transmission
Data 0 : OSD Off (OSD Lock Mode On)
1 : OSD On (OSD Lock Mode Off)
Data 0 : OSD Off (OSD Lock Mode On)
1 : OSD On (OSD Lock Mode Off)
[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]
[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
11. Remote Control Lock/Key Lock
(Command2:m)
➜To lock the front panel controls on the
projector and remote control.
Transmission
Data 0 : Lock Off
1 : Lock On
Data 0 : Lock Off
1 : Lock On
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
* If you're not using the remote control, use this mode.
When main power is On/Off, external control lock is
released.
06. Brightness (Command2:h)
➜To adjust screen brightness.
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [h] [ ] [Set ID] [ ] [Data] [Cr]
[h] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack