Filter
Top Products
RS-232C
40
13. Low Power (Command1:j, Command2:q)
➜To reduce the power consumption of the projector.
T
ransmission
Data 0 : Low Power Off(Normal)
1 : Low Power On(Silent)
Data 0 : Low Power Off(Normal)
1 : Low Power On(Silent)
[ j ] [q] [ ] [Set ID] [ ] [Data] [Cr]
[q] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
14. Auto Configure (Command1:j, Command2:u)
➜To adjust picture position and minimize image
shaking automatically. It works only in RGB mode.
Transmission
Data 1 : To set
Data 1 : To set
[ j ] [u] [ ] [Set ID] [ ] [Data] [Cr]
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
15. Input Select (Command1:x, Command2:b)
➜To select input source for the Set.
T
ransmission
Data 20 : Video 30 : S-Video
40 : Component 50 : RGB-DTV
60 : RGB-PC 70 : HDMI(DVI)-DTV
80 : HDMI(DVI)-PC
Data 20 : Video 30 : S-Video
40 : Component 50 : RGB-DTV
60 : RGB-PC 70 : HDMI(DVI)-DTV
80 : HDMI(DVI)-PC
[x] [b] [ ] [Set ID] [ ] [Data] [Cr]
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
12. Color Temperature (ACC) (Command2:u)
➜ Adjust the color temperature.
T
ransmission
Data 0 : Normal 1 : Cool 2:Warm
Data 0 : Normal 1 : Cool 2:Warm
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack